High-pressure air pump: dual function of blowing and suction, with two functions of vacuum and pressure relief, the gas passed is water-free and oil-free, with low noise, high efficiency, maintenance-free, high performance and other characteristics; power range :; air 0.25 ~ 25KW flow rate: 80m3 / h ~ 2050m3 / h; compression capacity: 1000mmH2O ~ 7000mmH2O; vacuum adsorption capacity: 1000mmH2O ~ 4500mmH2O, special blade design, high pressure, large air volume, low noise and long life. 2. High stability of air volume control and easy operation. 3. Complete styles. Strong insulation performance, easy installation, high reliability, high compression ratio, low bearing operating temperature, no oil and no pollution, easy maintenance, beautiful appearance, and the highest quality. The high pressure and high suction are due to the unique design of the impeller. The impeller edge of the vortex air pump is equipped with multiple blades. When the impeller rotates, due to the centrifugal effect, the air in the two blades is quickly moved to the outer edge direction, transferring energy, and the wind pressure is quickly superimposed, forming a high pressure or Colliers’ speed is increased. When the air is reintroduced into the impeller by the air duct, it will be accelerated again. Because multiple blades transfer energy, the wind pressure is quickly superimposed, forming a high pressure or high suction.
main feature
High efficiency and low energy consumption (the high-pressure air pump has a more conservative design in the high pressure range, and it can still operate safely when there are changes in the use situation);
Easy to install (can be installed in any horizontal or vertical direction);
High reliability (except for the impeller, the high-pressure air pump has no other moving parts and is almost maintenance-free);
Low vibration (The mechanical precision of the high-pressure air pump is high, and the rotating parts have undergone extremely precise balance design, testing, correction, and the vibration rate is very low);
Low noise (use Dongguan Fuersheng low-noise motor for direct transmission, all with built-in silencer to reduce operating noise);
Strong structure (the wind surface is made of aluminum alloy and milling alloy, which is different from the general aluminum shell or iron shell high-pressure air pump, which is more durable);
Scope of application (high-pressure air pump has many specifications, divided into high pressure and large air volume series, can be flexibly selected)
No oil, no pollution, calm as water.
working principle
The high-pressure air pump is a vortex air pump with dual suction and suction. The special blade design of the high-pressure air pump has the characteristics of high pressure, large air volume, low noise and high temperature resistance. The blower has strong insulation performance, easy installation and high stability. The gas passed is oil-free and dry.
The generation of high pressure and high suction is due to the unique design of the impeller. The impeller edge of the high-pressure air pump is equipped with multiple blades. When the impeller rotates, due to the centrifugal effect, the air in the two blades is quickly moved to the outer edge direction, and the energy is transferred. Colliers’ speed is increased. When the air is reintroduced into the impeller by the air duct, it will be accelerated again.
As multiple blades transfer energy, the wind pressure is quickly superimposed, forming a high pressure or high suction.
structure
Motor: City-state motor. (Based on European CE specifications)
Bearing: Between the impeller and shaft of the high-pressure air pump, a sealed and dustproof design is used to prevent dust from entering and lengthen the service life
Impeller: The impeller with special modified design reduces the gap between the impeller and the fuselage, which can prevent dust clogging during operation. Compared with other similar products, the angle and the gap of the gap are large, which is easy to cause obstruction and lead to the fault of high-pressure air pump. .
Use and maintenance
The vortex air pump (vortex fan) is placed in a stable place, and the surrounding environment should be clean, dry and ventilated.
2. The rotation direction of the impeller of the vortex air pump (vortex fan) must be consistent with the direction of the arrow marked on the fan cover.
3. The air pump without lubricating nozzle only needs regular maintenance and lubricating grease on both ends of the bearing as the general motor; the air pump with lubricating nozzle should be lubricated regularly with a period of once a week. Use a pressure rod grease gun (The grease is molybdenum trisulfide lithium base grease No. 3 or 7018 high-speed grease.)
4. The filter screen and muffler at both ends of the air inlet and outlet should be cleaned in time according to the situation, so as not to affect the use due to blockage.
